Does anyone know if the AP600 and 5508 supports a redundant controller option. Office extend is a crutial part of the business for my customer, and they are now looking to have a redundant controller in the DMZ is this possible.
Once the ap connects to the controller it will down load the mobility groups learning about the other controllers in the group. ALSO, once the ap joins you can put in first, second and third controllers in for its join process. See below
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
I am aware of the Cisco offering for a local AP and defining redundant controllers. However this is for the office extend solution where the AP600 is plug into an ADSL router and routes its CAPWAP traffic to a NATed address on the controller.
Would you define the NAT'ed address within the High Availability section of the AP?
it is not possible due to the firmware limitation but in next few days OEAP supported 3G card so you can get the local Internet redundancy. for controller you have to change manually Public IP add in OEAP until & unless the Firmware not upgrade of OEAP. (right Now it is not possible)
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...