Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

regarding indoor wireless covarage

Hi,

We have got some network site,which includes around 300 access point ,we are facing an issue with wireless covarge.

example

we have building with 8 indoor and 2 outdoor access point,and the buildng area is around 10 to 15 meter.the building got around 10 room's,the wireless covarage in rooms are very weak,outside rooms are getting full covarage.We have tried with diffrent antinas,like 6.5 dbi,10 dbi yagi ,patch,omni.But still we are getting same probelm,We are using 1242 autonamus access point with WLSM and WLSE.Do you thing change the access point location to inside rooms,will solve this issue.expecting your good openion.

Regarding this network It is 2 core switch and 100 access switch network.

Access point is terminated in access switch,and vlan is 254 for indoor and 253 for outdoor,

Expecting your good reply.

Regds

Saji k.s

Regarding

Saji k.s

1 REPLY
Bronze

Re: regarding indoor wireless covarage

Check if the indoor rooms are having heavy electrical equipments (e.g a datacenter), as these may interfere with normal signal operations. Most of the antennae are sufficient for indoor use. Following link may help you

http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008022b11b.html

101
Views
0
Helpful
1
Replies