Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Registrering 1020 and 1240AG ap on 4404. ieee pd device detected

Helo!

I have few controllers and more than 100 ap's. When I connnet ap to the ppoe switch (cat 3560) som ap's detected as ieee pd device and not seen by cdp. This ap's received ip addreses from DHCP and I can ping this device but can not registred this ap's on controller. I saw info that ap's can be broken, but it means that more than 25% of new 1240AG broken from the box.... can somebody help me out please

Everyone's tags (3)
18 REPLIES
New Member

Registrering 1020 and 1240AG ap on 4404. ieee pd device detected

When I try to debug controllel for trying regestering ieee pd device I have only this massages:

(Cisco Controller) >Tue Dec 24 14:58:49 2013: 00:0b:85:66:ac:30 Received LWAPP DISCOVERY REQUEST from AP 00:0b:85:66:ac:30 to 00:0b:85:43:af:6b on port '29'

Tue Dec 24 14:58:49 2013: 00:0b:85:66:ac:30 Successful transmission of LWAPP Discovery Response to AP 00:0b:85:66:ac:30 on port 29

Tue Dec 24 14:58:49 2013: 00:0b:85:9a:b7:90 Received LWAPP DISCOVERY REQUEST from AP 00:0b:85:9a:b7:90 to 00:0b:85:43:af:6b on port '29'

Tue Dec 24 14:58:49 2013: 00:0b:85:9a:b7:90 Successful transmission of LWAPP Discovery Response to AP 00:0b:85:9a:b7:90 on port 29

and no ap's regestred or log info on controller

Hall of Fame Super Gold

Registrering 1020 and 1240AG ap on 4404. ieee pd device detected

What is the EXACT model of your switch?

New Member

Registrering 1020 and 1240AG ap on 4404. ieee pd device detected

Cisco Catalist 3560  POE IOS 12.2(55)SE8

New Member

Registrering 1020 and 1240AG ap on 4404. ieee pd device detected

In DHCP i have:

Vendor classes for 1020 and 1240AG

102 option for each vendor class

dns name

in dns I have record

CISCO-LWAPP-CONTROLLER with  managemen address controller

Hall of Fame Super Gold

Registrering 1020 and 1240AG ap on 4404. ieee pd device detected

Cisco Catalist 3560  POE IOS 12.2(55)SE8

Again, let me repeat my question:  What is the EXACT MODEL of your switch? 

Whenever I see "IEEE PD" this means three things:

1.  Your AP is not booting up properly;

2.  You have a faulty cable; or

3.  Your switch is dead. 

I'm trying to determine #2.  The only way to do this is to determine if your switch model can support TDR

New Member

Registrering 1020 and 1240AG ap on 4404. ieee pd device detected

My switch do no support TDR.

New Member

Registrering 1020 and 1240AG ap on 4404. ieee pd device detected

We try connet new AP's from the box with new patchcord to the switch - no result - same story.  It happens on few switches. For example port 46 work ok - but ports 47-48 - is not

Hall of Fame Super Gold

Registrering 1020 and 1240AG ap on 4404. ieee pd device detected

Change the patch cable on both ends and try again.

New Member

Registrering 1020 and 1240AG ap on 4404. ieee pd device detected

Strange, ap's get ip and i can ping this ip, but not work. Now I will try to connet it to the switch directly with a new cable. The question is - it should be just cat 5 or 6 cable - nothing else?

Hall of Fame Super Gold

Registrering 1020 and 1240AG ap on 4404. ieee pd device detected

Cable should have all four pairs terminated. 

New Member

Registrering 1020 and 1240AG ap on 4404. ieee pd device detected

What meant is ap no registred and Cause=Max Retrasmission

New Member

Registrering 1020 and 1240AG ap on 4404. ieee pd device detected

we try to attach ap directrly with a short cable, but no sucsess, still ieee pd. switch is working properly. Other ap is detected correctly and registred on controller.

New Member

Registrering 1020 and 1240AG ap on 4404. ieee pd device detected

The problem still exist. ap's received dhcp address, the lights on 1020 shows that's all ok but not work !

VIP Purple

Registrering 1020 and 1240AG ap on 4404. ieee pd device detected

What is the software version you are running on your WLC ?

Rasika

New Member

Registrering 1020 and 1240AG ap on 4404. ieee pd device detected

4.2.209 that is the last software that support 1000 series ap

New Member

Registrering 1020 and 1240AG ap on 4404. ieee pd device detected

Wery strange situation:

I'l try try to register one of ap 1020 on other controller - it's OK. Lot of ap's that can't register on one controller can do it on the other. Than ckear config - and reboot AND REGISTRERING on the old controller.

The question is - how can I clear config o reset AP without regestering on controller.

Hall of Fame Super Gold

Registrering 1020 and 1240AG ap on 4404. ieee pd device detected

The question is - how can I clear config o reset AP without regestering on controller.

Command:  clear lwapp private

New Member

Registrering 1020 and 1240AG ap on 4404. ieee pd device detected

But 1020 have no console port. I can't connect to the ap wia telnet or ssh. Only ping ap

417
Views
0
Helpful
18
Replies