Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Regulatory wireless question, WLC, WAP and WAP Module..

Hello,


Would the following hardware have compatibility issues? 

  • WLC - AIR-CT2504-K9
  • WAP - AIR-CAP3602I-E-K9
  • WAP Module - AIR-RM3000AC-A-K9

I've read various articles which indicate that the WAP radios can only work on a single regulatory compliance band but country codes can be amended to make them work together, albeit not recommended.

I've not come across an article which details compatibility between the WAP and the module, though.

 

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Am I able, at all, to use the

Am I able, at all, to use the A module with the E WAP?

NOT going to work.  

8 REPLIES
VIP Purple

Hi,Check the country

Hi,

Check the country configured on WLC by issue the command: sh sysinfo

-E- regulatery domain for europe...

-A- domain for America region

http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/aironet-access-point-module-802-11ac/data_sheet_c78-727794.html

more check here:

http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1300-series/product_data_sheet0900aecd80537b6a.html

 

regards

Dont forget to rate helpful posts

New Member

Thank you, but that did not

Thank you, but that did not answer the question.

VIP Purple

Hi,this is related to

Hi,

this is related to respective regulatery domain.

  • WAP Module - AIR-RM3000AC-A-K9  --> this is only valid for america region. you cant use with -E- domain.

Regards

New Member

I'm aware of the regulatory

I'm aware of the regulatory compliance element and that you can't use A within an E domain.


Sorry. To summarise my question is:

 

Am I able, at all, to use the A module with the E WAP?

VIP Purple

Hi,As per my knowledge,I will

Hi,

As per my knowledge,

I will say again that you can not use A module with E domain.

You can only use A module with only A domain WAP.

E module with E domain WAP.

There is no specific document about this still i will try to findout and you can also ask your cisco device supplier, may be he can clarify.

Regards

Dont forget to rate helpful posts

Hall of Fame Super Gold

Am I able, at all, to use the

Am I able, at all, to use the A module with the E WAP?

NOT going to work.  

New Member

Thanks. I thought that would

Thanks. I thought that would be the answer - I was just wondering if anyone had tried and what the results were.

 

Hall of Fame Super Gold

Thank you for taking the time

Thank you for taking the time to rate our posts, Ash.  laugh

192
Views
7
Helpful
8
Replies
CreatePlease to create content