Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Reloading the IOS... Use FTP, TFTP, HTTP????

I have been trying to reload my IOS onto a Aironet 1300 Wirelesss Bridge, but I'm having issues with the FTP.  Does anyone know if using the FTP is the best route, or if there are any know issues using FTP?  This is the path that I'm using:

archive download-sw /overwrite /reload ftp:[[//*****:*****]@10.*.*.*]/ftp]/c1310-k9w7-tar.123-8.JEA3.tar

Error opening  <Invalid IP address or hostname>

Is there anything wrong with the link?

Thanks,

Daniel

1 ACCEPTED SOLUTION

Accepted Solutions
Gold

Re: Reloading the IOS... Use FTP, TFTP, HTTP????

It looks like you have some extra brackets in the line.Below is what the format should look like.  Is this what you have?

archive download-sw /overwrite /reload ftp://user:password@x.x.x.x/ftp/c1310-k9w7-tar.123-8.JEA3.tar

If you still have issues with FTP you could try TFTP.  It works fine.  I would stay away from HTTP.

1 REPLY
Gold

Re: Reloading the IOS... Use FTP, TFTP, HTTP????

It looks like you have some extra brackets in the line.Below is what the format should look like.  Is this what you have?

archive download-sw /overwrite /reload ftp://user:password@x.x.x.x/ftp/c1310-k9w7-tar.123-8.JEA3.tar

If you still have issues with FTP you could try TFTP.  It works fine.  I would stay away from HTTP.

496
Views
0
Helpful
1
Replies
CreatePlease login to create content