Well since the mesh AP's don't support h-reap, you would have to run them like local mode AP's. So depending on your WAN connection/bandwidth you can possible achieve this. Currently the mesh isn't designed or remote site wireless, since there is no h-reap function, but you can get it to work if you have a good wan connection.
It's does, but when an ap is in h-reap mode, connectivity to the wlc is not much of an issue since the h-reap ap will go in stand alone mode. Local mode AP's will have to go in discover mode and will drop clients.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...