Remote Wireless Clients - Local Network Communication
I have several Cisco 1130ag AP's at remote offices and a 4402 controller at our Corporate location. Does anyone know what happens to the wireless clients when connectivity between the two sites is down? Do the wireless clients get a local IP address instead of a IP address from our Corporate DHCP server. Non wireless clients at our remote offices currently use DHCP.
Re: Remote Wireless Clients - Local Network Communication
If connectivity back to the controller is down, then the AP's would also be down.
If you use H-REAP, then you would have the ability to configure a local SSID and specify a local DHCP server to use locally until the connection was again brought back up. Then the AP would automatically see the controller and switch back to using the controller and it's settings.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...