I have a current problem when a client will roam to a repeater AP and will lose layer3 connectivity. I am currently looking into the 50% overlapping coverage as the possible problem. I am able to access the repeater via telnet and http which tells me that this may not be the issue but I was wondering if for some reason this would affect clients moreso than the repeater.
Yeah you are correct. It is mandatory for the repeaters to have 50% overlap with the root access point. Even though you may not find any errors on the repeater AP, the clients will not be able to transfer data if there is less than 50% overlap with the root.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...