Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Reset interface Dot11Radio0 AP 1131G-E-K9.

Hello.

Look an the next problem.

Permanetly reset interface. Reboot AP not help.

Where is find problem?

sh interfaces dot11Radio 0
Dot11Radio0 is up, line protocol is up
  Hardware is 802.11G Radio, address is 0027.0d55.da70 (bia 0027.0d55.da70)
  MTU 1500 bytes, BW 54000 Kbit, DLY 1000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input never, output 00:00:00, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/1127/1080/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/30 (size/max)
  5 minute input rate 59000 bits/sec, 57 packets/sec
  5 minute output rate 401000 bits/sec, 47 packets/sec
     7767310 packets input, 943395390 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 input packets with dribble condition detected
     10457785 packets output, 4258330274 bytes, 0 underruns
     3854 output errors, 0 collisions, 86 interface resets


941
Views
0
Helpful
0
Replies