05-11-2008 04:53 AM - edited 07-03-2021 03:50 PM
I bought an Aironet 1220A series AP. I can't get to priviledge mode and I have tried to reset the AP to no avail. Does any know the trick to reset the AP?
Here is some info about the AP:
From bootup sequence - cisco AIR-AP1220-IOS-UPGRD (PowerPC405GP) processor with 14326K/2048K bytes of memory.
Processor board ID VDF0643Q0TR
PowerPC405GP CPU at 196Mhz, revision number 0x00C4
Last reset from power-on
Bridging software.
1 FastEthernet/IEEE 802.3 interface(s)
1 802.11 Radio(s)
**********************************
What's in the flash dir
ap: dir flash:
Directory of flash:/
3 -rwx 97 <date> env_vars
7 drwx 384 <date> c1200-k9w7-mx.122-15.XR2
**************************************
from the sho ver command
ap>sho ver
Cisco Internetwork Operating System Software
IOS (tm) C1200 Software (C1200-K9W7-M), Version 12.2(15)XR2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 17-Sep-04 13:40 by kellythw
Image text-base: 0x00003000, data-base: 0x005E8554
ROM: Bootstrap program is C1200 boot loader
BOOTLDR: C1200 Boot Loader (C1200-BOOT-M) Version 12.2(8)JA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
ap uptime is 1 minute
System returned to ROM by power-on
System image file is "flash:/c1200-k9w7-mx.122-15.XR2/c1200-k9w7-mx.122-15.XR2"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
cisco AIR-AP1220-IOS-UPGRD (PowerPC405GP) processor with 14326K/2048K bytes of memory.
Processor board ID VDF0643Q0TR
PowerPC405GP CPU at 196Mhz, revision number 0x00C4
Last reset from power-on
Bridging software.
1 FastEthernet/IEEE 802.3 interface(s)
1 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0B:46:B8:CA:ED
Part Number : 0-0000-00
PCA Assembly Number : 000-00000-00
PCA Revision Number :
PCB Serial Number : VDF0643Q0TR
Top Assembly Part Number : 000-00000-00
Top Assembly Serial Number :
Top Revision Number :
Product/Model Number : AIR-AP1220-IOS-UPGRD
Configuration register is 0xF
05-11-2008 07:25 AM
I was able to figure out my own question - isn't that something? The answer to my problem was that I was not using the correct password for the console or the correct userid/password combination for http.
The correct password for the console is: cisco with a BIG "C" - Cisco
and for the web configuration tool it is cisco with a BIG "C" also - Cisco/Cisco.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: