Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Restrict SSID to Buildings on Campus with WCS

I am managing a deployment of 500+ access points using WISMs and WCS (both v4.2). We have many SSIDs but need to be able to restrict the availability of certain SSIDs in parts of the campus. How is this best achieved?


Re: Restrict SSID to Buildings on Campus with WCS

Hi Chris,

The best way to accomplish this is with the WLAN Override functionality. This is from the documentation:

"The default system behavior is for a WLAN Controller (WLC) to push all WLANs to all

of its joined APs. Many Cisco customers deploying the Cisco Unified Wireless Network

solution want to restrict certain SSIDs to sets of access points. For example, an

enterprise might want to offer open guest access in an Executive Briefing Center but no

where else on the campus. The way to override the default behavior is to use the WLAN

Override feature."

Hope this helps.



New Member

Re: Restrict SSID to Buildings on Campus with WCS

This feature does work but its not manageable at all. For example I only want my guest wireless ssid to be available in one building in the campus. This means that when I migrate or add more aps, I have to specify the override on each one! Also how can you see which aps are overriding, which arent without going into each ap individually?

There must be another way?

New Member

Re: Restrict SSID to Buildings on Campus with WCS

Found it! Well sort of. WLAN Override using AP templates. Not ideal because when new aps join they will broadcast all networks until the template is applied, then I have to manually reset the aps to get it to work.

Better than nothing but needs improvement Cisco!?