Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Roam Testing to Millisecond

Is there a way to change the controller time stamp to include milliseconds in the CLI? Or, is there another way to test roaming to the millisecond?

4 REPLIES
Gold

Re: Roam Testing to Millisecond

If you have autonomous AP's just setup the logging to show the millisecond with "service timestamps log datetime msec"

If you have a controller the debug client output shows the milliseconds.

New Member

Re: Roam Testing to Millisecond

I can't see the milliseconds on the controller debug. I get:

Thu Jun 24 08:33:51 2010: 00:16:6f:6e:88:15 10.34.72.133 RUN (20) Change state to START (0) last state RUN (20)

Thu Jun 24 08:33:51 2010: 00:16:6f:6e:88:15 10.34.72.133 START (0) Initializing policy

We are running code 4.2.207.0.

New Member

Re: Roam Testing to Millisecond

In routers it would be:

service timestamps debug date local msec

service timestamps log date local msec

This will add the msecs to the log and debug lines.


James

New Member

Re: Roam Testing to Millisecond

That doesn't work for me. I don't get those options.

(ak650-wism-s4-2) config>service timestamps debug ?       

datetime       Timestamp debug messages with standard date and time.

disable        Do not timestamp debug messages.

uptime         Timestamp debug messages with time since last reset.

(ak650-wism-s4-2) config>service timestamps debug datetime ?

(ak650-wism-s4-2) config>service timestamps debug datetime

(ak650-wism-s4-2) config>service timestamps log

datetime       Timestamp log messages with standard date and time.

disable        Do not timestamp log messages.

uptime         Timestamp log messages with time since last reset.

(ak650-wism-s4-2) config>service timestamps log datetime ?

(ak650-wism-s4-2) config>service timestamps log datetime

248
Views
7
Helpful
4
Replies