I would like to know how to optimize roaming between several access points? What are the settings to that make sure a wireless client associates with the AP with the strongest signal as a wireless client traverses a long distance?
You can configure the data rate setting on the AP to maximize coverage area or to optimize on throughput. You can use the Data Rate settings to set the access point/bridge to serve client devices operating at specific data rates. You can also configure the access point/bridge to set the data rates automatically to optimize either range or throughput. For more information have a look at the following URL.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...