Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

roaming issue between AP1231 and AP1260

Hello,

a client has a roaming issue with summit clients

SDC-PE15N. He has installed the latest driver, now.

He has installed IOS-based AP1231 and IOS-based AP1260.

When a client roams from AP1231 to AP1260 and the N-standard is active then he has a roaming issue. He looses the connection for a few seconds.

If  802.11n is deactivated and 1MBps is configured as mandatory then roaming works fine.

Does everyone has an idea?

thanks

Martin

Everyone's tags (4)
2 REPLIES

Re: roaming issue between AP1231 and AP1260

That sounds more like the device needs 1mb as mandatory vs an 'N' issue per se.

N will work with 1M as mandatory.

Leave all the N config in place and set 1M a mandatory and let us know if roaming works as it should.

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: roaming issue between AP1231 and AP1260

Thanks

I will try and let you know

best regards

martin

380
Views
0
Helpful
2
Replies
CreatePlease login to create content