I have a DSL connection to the internet and a fiber connection back to my main building. Can routing be done with a 5510? I want to push all traffic except for two specific destination IP's out my regular DSL connection, and then when traffic is generated for 172.17.20.1 or 172.17.20.2 it will push the traffic out over the fiber link.
I think simple Access Lists at the middle router should do. THis would filter as per your requirement. Can you send me the network setup you are using?. That would probably help me to sed you the required configuration.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...