Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

RRM DCA algorithm and DCA sensitivity

Can anyone explain in detail the way DCA works? I have read the RRM document - http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072c759.shtml#dca_algorithm

many times and I still do not understand DCA fully. It would help to have examples as well as to know when DCA sensitivity setting of high would be recommended.

Thanks,

Joe

1 REPLY
Silver

Re: RRM DCA algorithm and DCA sensitivity

DCA Sensitivity Level The configured DCA sensitivity setting: low, medium, or high. This setting determines how sensitive the DCA algorithm is to environmental changes such as signal, load, noise, and interference when determining whether to change channels.You can use the config advanced {802.11a | 802.11b} channel dca sensitivity {low | medium | high} CLI command to configure the DCA sensitivity level.

529
Views
0
Helpful
1
Replies
CreatePlease to create content