I have a Cisco 1230 AP along with a Sonic Wall TZ 210 and a Linksys SFE 2010P switch. On my AP I have created 2 SSID's. and 2 VLAN's. The first SSID is being broadcasted and has WPA encryption on it for our Corporate USers. The Second SSID is a Guest SSID and too is being broadcasted. I can make a laptop connect to the 1st SSID, but for some reason the 2nd SSID nothing will connect to it. The first SSID is associated to VLAN1 and the 2nd SSID is associated to VLAN2. VLAN1 has WPA encryption on it. VLAN2 is setup as Open and no Encryption. Any ideas?
My next question is how to I configure traffic on this AP with the other equipment mentioned? On my sonicwall we have segmented port6 on it to be a different subnet from the corporate subnet. On the Linksys switch I have enable VLANS on port2 and port48 which are on VLAN2. All other ports are on VLAN1. The AP connects to Ports 2 on the linksys switch and port 48 connects to port 6 on the Sonic Wall. When a corporate user connects to SSID1 I want them to be able to connect to the Corporate subnet. When a guest connects to SSID2 I want them to connect to the segmented guest network to only have Internet Access.
Hope this makes sense!
Below is my config on the AP. I am really only familiar with the IOS web interface so if you can explain it using that I'd appreciate it.