My customer has a 526 WLC installed in a guest Pavilion. It is supporting 5 521 Access Points. Yesterday the customer wanted to know if there was a way that they could from the WLC shut down access to the Wireless Network. They have a group in and DO NOT want their employees to have the ability to connect to wireless.
I'm not familiar with the 526, but if it's the same as the 2100/4400 series, you can disable the B/G and A networks. On the GUI, click on the Wireless tab, then look on the left for the 802.11b/g and 802.11a dropdowns. Click those and click on the network, then disable it from the following screen.
This may be useless if the 526 has a different GUI.
If the client want only Guest to have access to the wireless, then how about configuring access with a time limit or using the LobbyAdministrator account to dish out Guest accounts with time limit (30 days or less).
Fill in the blanks and when you reach User Access Mode, choose "LobbyAdministrator".
Log out and HTML back but use the LobbyAdministrator account.
From here, you can create/delete users for your hotspots. The user account you'll create is a "time bomb" with a maximum life of 30 days. If you want to create a permanent account follow my intial instructions but choose "ReadWrite" instead of LobbyAdministrator.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...