cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
233
Views
0
Helpful
1
Replies

SSID and subnets

ricardorojas123
Level 1
Level 1

I can to have two SSIDs for all branch of my country, but each ones in a differents subnets,for example:

Area 1

SSID 1 : guest -> 192.168.1.1

SSID 2 : office -> 192.168.2.1

Area 2

SSID 1 : guest -> 192.168.3.1

SSID 2 : office -> 192.168.4.1

Area 3

SSID 1 : guest -> 192.168.5.1

SSID 2 : office -> 192.168.6.1

I have with a Wireless Lan Controller 4402 and version 4.

1 Reply 1

ankbhasi
Cisco Employee
Cisco Employee

Hi Friend,

If i get your question correct you want all your braches to have 2 SSIDs mapped to different subnets? If it is correct you can definetely achieve the same while creating dynamic interfaces and mapping them to the WLANS (SSIDs).

Have a look at this configuration guide which will guide you how to create interfaces and then map it to WLANs

http://www.cisco.com/univercd/cc/td/doc/product/wireless/control/c44/ccfig40/c40mint.htm#wp1114099

http://www.cisco.com/univercd/cc/td/doc/product/wireless/control/c44/ccfig40/c40wlan.htm#wp1089232

HTH

Ankur

*Pls rate all helpfull post

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: