AP-Master with interface dot1 set to station-role root bridge
AP-Slave with interface dot1 set to station-role non-root bridge
and interface dot0 set to station-role root access-point fallback track Dot11Radio1 shutdown
AP-Slave is bridged to AP-Master on 5GHz link and offers access-point coverage in 2,4GHz.
Everithing is perfectly working except for:
I expect that when AP-Slave loose connection to AP-Master trough interface Dot1 bridged the interface dot1 set to shutdown and also interface dot0 set to shutdown preventing client to associate to interface dot0.
This doesn't happen.
When SLAVE dot1 loose connection to Master trough dot1 interface, neither interface never goes into a shutdown state not dot0 goes into shutdown state.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...