Throughput barrier for 3.3 miles ?

[s-cerman]

Hi

I installed 4 340 Wireless Bridge for remote network access.

Two is connected via yagi antennas between 0.5 miles distance and one of these bridges in located in a tower and connected to another 340 Wireless Bridge via a hub and these brigge is connected to a parabolic dish with communicates to another dish from 3.3 miles distance and fourth bridge is connected this dish.

Here is my question?

After connection established i made bandwith and download tests beetween two connected networks connected by wireless equipments and couldnt pass

2.5 Mbit per second.

I runned signal test via Bridges's web management interface and i got app %75 signal quality level and %60 signal strength level beetween yagi's and %60

signal quality level and %50 signal strength level beetween 3 dishes...

Techology supports up to 11Mbit/s but is it possible

to get app 4 or 5 Mbit/s bandwidth in this case.

Thanks in advance

[mmellet]

I think you’re exceeding specs. The specs say “Indoor: 130 ft (40 m) @ 11 Mbps 350 ft (107 m) @ 1 Mbps” and “Outdoor: 800 ft (244 m) @ 11 Mbps 2000 ft (610 m) @ 1 Mbps”