Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Throughput barrier for 3.3 miles ?


I installed 4 340 Wireless Bridge for remote network access.

Two is connected via yagi antennas between 0.5 miles distance and one of these bridges in located in a tower and connected to another 340 Wireless Bridge via a hub and these brigge is connected to a parabolic dish with communicates to another dish from 3.3 miles distance and fourth bridge is connected this dish.

Here is my question?

After connection established i made bandwith and download tests beetween two connected networks connected by wireless equipments and couldnt pass

2.5 Mbit per second.

I runned signal test via Bridges's web management interface and i got app %75 signal quality level and %60 signal strength level beetween yagi's and %60

signal quality level and %50 signal strength level beetween 3 dishes...

Techology supports up to 11Mbit/s but is it possible

to get app 4 or 5 Mbit/s bandwidth in this case.

Thanks in advance

New Member

Re: Throughput barrier for 3.3 miles ?

I think you’re exceeding specs. The specs say “Indoor: 130 ft (40 m) @ 11 Mbps 350 ft (107 m) @ 1 Mbps” and “Outdoor: 800 ft (244 m) @ 11 Mbps 2000 ft (610 m) @ 1 Mbps”