Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Track number of users per SSID using SNMP on WLC 2504

I am trying to track the number of users per SSID that are connected to my wireless enviornment. I have a number of LWAP 1142 access points connected to a 2504 Wireless controller. I have 3 SSIDs that are used by different user groups. I wish to track the number of users that are connected to each of the SSIDs at any given time. I am currently using Cacti to monitor my network so I am looking for an snmp O.I.D that would help me get this informaiton. I would prefer a counter of active clients per SSID, but could also use a total count of different clients. Any help, I have looked through the standard Cisco Wireless MIBs and haven't found what I'm looking for yet.

Everyone's tags (6)
9 REPLIES
New Member

Track number of users per SSID using SNMP on WLC 2504

snmpwalk -v 2c -c $community $IP_of_Controller 1.3.6.1.4.1.14179.2.1.4.1.7 | grep -i "ssid name" | wc -l

Hope this helps

New Member

Hi there, 

Hi there, 

Can anyone please tell me a resource to find template for WLC 2504?

New Member

what kind of templates are

what kind of templates are you trying to find?

If you are looking for cisco Prime templates please refer the following link :

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-1/user/guide/pi_ug/config-temp.html

Is it for WCS then you can go to the following link :

http://www.cisco.com/c/en/us/td/docs/wireless/wcs/7-0/configuration/guide/WCS70cg/7_0temp.html#wp1337951

New Member

Thanks pretty much for the

Thanks pretty much for the links. Much appreciated, but i needed templates for Cacti, sorry on my part for not mentioning 

New Member

I had to create my own

I had to create my own templates. But if you are looking for the correct OID it is .1.3.6.1.4.1.14179.2.1.1.1.38.1. Simply increment the number at the end for each SSID. I don't have a well constructed template, otherwise I would be happy to share it.

New Member

Thanks Daniel for the reply,

Thanks Daniel for the reply, i will try this on but it will be also ok for me if you share your template if possible :)

Thanks 

New Member

I could find the templates at

I could find the templates at the following link:

http://docs.cacti.net/templates

New Member

Thanks ahakels but i dont

Thanks ahakels but i dont have the model required. Still thanks for the effort.

New Member

can you guide me the template

can you guide me the template of Cacti for WLC 2500, cant find it anywhere.

2348
Views
0
Helpful
9
Replies