Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Trick for tacking SSID usage

Good morning all,

Trying to come up with usage stats for an SSID that i'm phasing out(LEAP SSID). While I am using ciscoworks which fires off the same time each week to give me some general stats. Im looking for something more all around.

I have all my APs pointing to a single syslog box, however it doesn't presently record the SSID or VLAN. If i could get which VLAN the user was associated with, that would rock as well.

I am not talking about issuing a command to obtain them manually. I am asking for methods used to turn possibly a logging option on, which pertains to vlan/ssid of an association.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Trick for tacking SSID usage

Hey Robert,

Its been a while, hope all is well with you! Maybe this Report would do the trick (or maybe I'm looping on too much coffee :)

Displaying a Per VLAN Client Report

Per VLAN Client Report

VLAN ID

The identification number of the VLAN.

VLAN Name

The name of the VLAN.

RF Interface

The radio interface name.

SSID

The unique identifier the client device uses to associate with the access point.

Client MAC Address

The MAC address of the client.

Client Name

The name of the client.

Client IP Address

The IP address of the client.

Client Type

The type of client associated to the access point.

As Of

The time the WLSE polled information from the device.

http://www.cisco.com/en/US/products/sw/cscowork/ps3915/products_user_guide_chapter09186a0080528675.html#wp1075184

Hope this helps!

Rob

2 REPLIES
Hall of Fame Super Red

Re: Trick for tacking SSID usage

Hey Robert,

Its been a while, hope all is well with you! Maybe this Report would do the trick (or maybe I'm looping on too much coffee :)

Displaying a Per VLAN Client Report

Per VLAN Client Report

VLAN ID

The identification number of the VLAN.

VLAN Name

The name of the VLAN.

RF Interface

The radio interface name.

SSID

The unique identifier the client device uses to associate with the access point.

Client MAC Address

The MAC address of the client.

Client Name

The name of the client.

Client IP Address

The IP address of the client.

Client Type

The type of client associated to the access point.

As Of

The time the WLSE polled information from the device.

http://www.cisco.com/en/US/products/sw/cscowork/ps3915/products_user_guide_chapter09186a0080528675.html#wp1075184

Hope this helps!

Rob

Re: Trick for tacking SSID usage

Set a job up in my WLSE, good to go :) Not the perfect solution but it works.

136
Views
0
Helpful
2
Replies