Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Turn off LEDs on AP 1240, etc

Hi folks I need to turn off all the leds on the aps we have installed as they are students sleeping quarters and some students are complaing the leds are keeping thme awake does anyone know how to turn the leds off completlely either via a software command or hardware thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Turn off LEDs on AP 1240, etc

Hi Henry,

Give this a try;

config ap led-state

To enable or disable the LED-State for an access point, use the config ap led-state command.

config ap led-state {enable | disable} {Cisco_AP | all}

Syntax Description

config

Display configurations.

ap

Advanced parameters.

led-state

Enable or disable the LED-State for an access point.

{enable | disable}

Enable or disable the access point's LED-State.

{Cisco_AP | all}

Name of a Cisco lightweight access point or all to specify all access points.

http://www.cisco.com/en/US/docs/wireless/controller/4.1/command/reference/clic1.html#wp2384867

Hope this helps!

Rob

3 REPLIES
Hall of Fame Super Red

Re: Turn off LEDs on AP 1240, etc

Hi Henry,

Give this a try;

config ap led-state

To enable or disable the LED-State for an access point, use the config ap led-state command.

config ap led-state {enable | disable} {Cisco_AP | all}

Syntax Description

config

Display configurations.

ap

Advanced parameters.

led-state

Enable or disable the LED-State for an access point.

{enable | disable}

Enable or disable the access point's LED-State.

{Cisco_AP | all}

Name of a Cisco lightweight access point or all to specify all access points.

http://www.cisco.com/en/US/docs/wireless/controller/4.1/command/reference/clic1.html#wp2384867

Hope this helps!

Rob

New Member

Re: Turn off LEDs on AP 1240, etc

thanks mate it worked

Hall of Fame Super Red

Re: Turn off LEDs on AP 1240, etc

Hi Henry,

Good stuff! You are most welcome my friend.

Cheers,

Rob

1697
Views
0
Helpful
3
Replies