Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Turn off Status LED on LWAP 1130

Hi there,

We have mounted some access points in a couple of cinemas and we are concerned that the lights on the AP's will be a distraction. Does any one know if it's possible to turn off the status LED on the face of the Access Point, and how to do it?

Thanks!

Mike.

1 REPLY
Hall of Fame Super Red

Re: Turn off Status LED on LWAP 1130

Hi Mike,

Most possible my friend :)

config ap led-state

To enable or disable the LED-State for an access point, use the config ap led-state command.

config ap led-state {enable | disable} {Cisco_AP | all}

Syntax Description

config

Display configurations.

ap

Advanced parameters.

led-state

Enable or disable the LED-State for an access point.

{enable | disable}

Enable or disable the access point's LED-State.

{Cisco_AP | all}

Name of a Cisco 1000 Series lightweight access point or all to specify all access points.

http://www.cisco.com/en/US/docs/wireless/controller/4.1/command/reference/clic1.html#wp2384867

Hope this helps!

Rob

789
Views
0
Helpful
1
Replies