Two Aironet APs

[cmd1]

I have two Aironet 350 APs installed in our Enterprise wharehouse. I keep getting the error message "Network Bridge Loop: Received packet from Self destined to [AWC Mcast All]014096ffffff on port "fec0" on both AP. Is there some extra config that must be done when installing two APs when their signals overlap.

[fjuch]

Are they on different frequencies. They should be. The clients will roam to the best AP

[cmd1]

Thanks for the tip. Where do you set the frequency?

[dave.reid]

When the signals overlap, the AP's should be on different frequencies and have the same SSID. That eliminates interference in the overlap zone. In the US, stick to channels 1, 6 & 11.

Set the frequency in the AP Radio/Hardware page.

[cmd1]

Thank you very much! They were both set to channel 6.

Thanks again!