Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Tx Power Level on AP1100

Hello,

I changed the Tx power level on my AP from Global- 1 to custom -3. for both 802.11a & b/g. After this i noticed our internet stopped (VSAT modem). Not sure why the internet stopped, after 12 hours, i decided to change the Tx back to global and voila, inernet was back in 3 mins. The Wlan controller, router, AP and link from modem are all connected to a 2950 switch.

What is/are the effecta of chaning the Tx to custom and could this change have caused the problem or was it just a coincidence?

Can WLAN controllers do any routing.I was thinking of giving port 4 a public IP and connect directly to a router/modem.

Thanks

1 REPLY
Hall of Fame Super Silver

Re: Tx Power Level on AP1100

Can't do routing.... and don't know why changing the TX would affect the modem. Are you sure when you changed it to 3 that users were still associating to the AP?

-Scott
*** Please rate helpful posts ***
158
Views
0
Helpful
1
Replies