I have configured the c871 for wirless. I have one ssid attached to vlan 1. I have set up a dhcp pool which works, beacuse I can grab an IP when hard connected. I can connect to the AP, but am not issued an IP. Included is a config form this AP with the important sections.
Re: Unable to get a DHCP address via Wireless C871W
If you are having problems with an IP-based management connection (telnet or browser) the bridge will, by default, try to get an address via DHCP. If it can't, the address for the bridge will be 10.0.0.1 until a different one is assigned manually or the DHCP issue is resolved.
< PRE >
(#)For this reason being that : - application that doesn't use multicast, sends one copy of each packet ( data unit of traffic at layer 3 ) to each client (" who seeks the traffic ).- application that does use multicast, sends ...
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...