12-16-2013 03:53 AM - edited 07-04-2021 01:26 AM
I am working on a LAB and the AP i got is stuck in "ap:" mode. Please help me to recover this.
Below log shows what i have tried
ap: ether_init
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
link auto-negotiating....
auto-negotiation takes 10000 milli-seconds to complete
ERROR: timeout waiting for auto-negotiation to complete
ERROR: fail to bring ethernet link up
ap: tftp_init
ap: boot
Loading ""...: permission denied
Error loading ""
Interrupt within 5 seconds to abort boot process.
Boot process failed...
i have not tried the TFTP way to upload the IOS.
Solved! Go to Solution.
12-16-2013 04:02 AM
12-16-2013 11:01 AM
12-16-2013 04:02 AM
12-16-2013 11:01 AM
Hi,
Please check this
https://supportforums.cisco.com/thread/334736
https://supportforums.cisco.com/thread/2138566
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide