I'am getting Underrun, Overrun and Missed Errors on one side of my point to point 340 Bridge connection. All I can find is documentation stating that "this occurence is rare" which tells me nothing about what is going on. We tried a different bridge and are still getting the same issue. We swapped out switches and still the same issue. Was wondering if anybody has had these errors and what do I need to do?
Re: Underruns,Overruns and missed Errors on the br340
From the information included below, it seems that possibly the bridge cannot handle the amount of traffic that is being sent and received via the bridge. If you are not on the latest firmware for the 340 bridge, you may want to consider upgrading it to the latest.
*Underrun PacketsPackets failed to be sent because the access point was unable to keep up with the Ethernet controller
*Overrun PacketsPackets that were discarded because the access point had a temporary overload of packets to handle.
These definitions were taken from the following URL:
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...