Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Upgrade AP Image from Cisco 3850 w/ Integrated Wireless Controller

I have just deployed a new 3850 with the integrated wireless controller and 2 2600i APs. Before joining the APs to the controller, I upgraded them to the latest LWAPP image. It appears that they were downgraded when joining the controller the first time. Is there a way to install the latest version of LWAPP software back to the APs from the 3850 controller?

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Hi Andrew,LAP always download

Hi Andrew,

LAP always download the image run on a WLC (in this case 3850). So no point upgrade LAP independantly as it will always sync with image run on the controller it joins.

In this case you can upgrade 3850 to 3.3.2 (which is the latest image as of today) if you are not already running that code

HTH

Rasika

**** Pls rate all useful resposnes ****

1 REPLY
VIP Purple

Hi Andrew,LAP always download

Hi Andrew,

LAP always download the image run on a WLC (in this case 3850). So no point upgrade LAP independantly as it will always sync with image run on the controller it joins.

In this case you can upgrade 3850 to 3.3.2 (which is the latest image as of today) if you are not already running that code

HTH

Rasika

**** Pls rate all useful resposnes ****

218
Views
0
Helpful
1
Replies
CreatePlease login to create content