I am not sure. I will look into it. It appears you have become the first christian thrown to the lions and they are hungry. I wouldn't be so alarmed by a state up alarm as you would be if you see a state down alarm. Are you seeing any of those? Also, any disassociation from the controller?
Bear in mind there are still alot of open caveats on both 4.2 and 5x. If you are not seeing disassociations and are seeing no major client outages I wouldn't worry too much. If on the other hand the client drops are becoming unbearable I would contact TAC.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...