Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Upgraded AP1231G still has old MGMT interface - issues connecting

Hi, I have a stand alone AP (Air-AP1231G-E-K9) which is not lightweight, or connected to a WLC, its a simple config with a Radio and Management interface.

The IOS was previously running c1200-k9w7-mx.122-13.JA1, so I upgraded the IOS to c1200-k9w7-mx.123-8.JA2 (Similar to some other working AP's I have), however there are problems with clients connecting to the AP, they doesn't see the AP.The configs on working and non-working AP's are identical (apart from IP's) and the only difference I can find is the web management interface screen which is different.There are more options on the newer working AP's with the new version of code and newer management interface,,, the AP I've upgraded has an older looking web management interface.

If i want to upgrade the files on the new AP to have the new Management interface over http working, what do I need to do, where do I get the files from, and what do I need to replace on the new AP along with the latest IOS to be able to configue this and hopefully get it working?

Thanks,

Brian

3 REPLIES

Re: Upgraded AP1231G still has old MGMT interface - issues conne

It all should be upgraded from the one IOS load. You could try uploading the newer load and see if it fixes. I generally prefer to do these from the CLI:

archive download-sw /f /o tftp:///

HTH,

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: Upgraded AP1231G still has old MGMT interface - issues conne

Hi Steve,

Thanks for that,so there must be another problem if the web mgmt interface did not upgrade during the new ios install (which was through the cli).is there a quick way to flush the old code + other directories on the AP's so I can try the IOS upgrade again from my tftp server?

Regards,

Brian

Re: Upgraded AP1231G still has old MGMT interface - issues conne

the command I gave you, clears the IOS from memory, and then puts the new image on,

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
136
Views
0
Helpful
3
Replies