08-02-2013 08:21 AM - edited 07-04-2021 12:34 AM
Can I do a direct upgrade from 6.0.188 to 7.3.101.0? Is there a doc available that explains the process? I have 2 5508 controllers and planning on upgrading one controller at a time.
08-02-2013 08:28 AM
No, you can't do a direct upgrade, you'll need to do a staged upgrade to 7.0 or 7.2 first.
This is lined out in the release notes:
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn73.html#wp976667
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
08-02-2013 08:29 AM
Greg,
This is what I got directly from Cisco's release notes on 7.3.101:
•
It is not possible to directly upgrade to the 7.3.101.0 release from a release that is older than 7.0.98.0.
I'd go to a 7.0.x release from 6 and then go to 7.3.101.0
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide