Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Upgrading a wlc 5508 from 6.0.118 to 7.3.101.0

                   Can I do a direct upgrade from 6.0.188 to 7.3.101.0? Is there a doc available that explains the process? I have 2 5508 controllers and planning on upgrading one controller at a time.

  • Other Wireless - Mobility Subjects
2 REPLIES

Upgrading a wlc 5508 from 6.0.118 to 7.3.101.0

No, you can't do a direct upgrade, you'll need to do a staged upgrade to 7.0 or 7.2 first.

This is lined out in the release notes:

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn73.html#wp976667

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Upgrading a wlc 5508 from 6.0.118 to 7.3.101.0

Greg,

This is what I got directly from Cisco's release notes on 7.3.101:

It is not possible to directly upgrade to the 7.3.101.0 release from a release that is older than 7.0.98.0.

I'd go to a 7.0.x release from 6 and then go to 7.3.101.0 

HTH

151
Views
5
Helpful
2
Replies
This widget could not be displayed.