Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Upstream bandwidth QoS profile 5508 WLC

Hello,

Is it possible, through a QoS profile, to control how much bandwidth a user gets to use for upstream traffic?  I can easily set limits for downstream traffic, via the per user bandwidth contracts, but it is not obvious to me on how to control upstream traffic.

Any and all info is appreciated!

Thanks 

  • Other Wireless - Mobility Subjects
Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: Upstream bandwidth QoS profile 5508 WLC

upstream traffic needs to be defined at L3, via your QoS settings. As you've said, the profile on the WLC is downstream only.

HTH,

Steve

Sent from Cisco Technical Support iPad App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
1 REPLY

Re: Upstream bandwidth QoS profile 5508 WLC

upstream traffic needs to be defined at L3, via your QoS settings. As you've said, the profile on the WLC is downstream only.

HTH,

Steve

Sent from Cisco Technical Support iPad App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
1725
Views
0
Helpful
1
Replies