I changed the Country code to US and tried it.. but still the APs are not joining the WLC.
Any quick suggestions will be appriciable.
I am getting the following error now
d8:24:bd:59:6d:10 *apfReceiveTask: Feb 25 13:58:28.735: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:290 RRM LOG: Airewave Director: Could not find valid channel lists for 802.11bg *spamApTask5: Feb 25 13:57:49.687: %CAPWAP-3-POST_DECODE_ERR: capwap_ac_sm.c:4452 Post decode processing failed for Config status from AP d8:24:bd:59:6d:10 *spamApTask5: Feb 25 13:57:49.685: %LWAPP-3-RD_ERR4: capwap_ac_sm.c:2431 Invalid regulatory domain 802.11bg:-A 802.11a:-A for AP d8:24:bd:59:6d:10 *spamApTask5: Feb 25 13:57:49.685: %LOG-3-Q_IND: spam_lrad.c:9223 Invalid country code () for AP d8:24:bd:59:6d:10[...It occurred 2 times.!] *spamApTask5: Feb 25 13:57:49.685: %LWAPP-3-RD_ERR7: spam_lrad.c:9223 Invalid country code () for AP d8:24:bd:59:6d:10
It does not matter where the AP is produced. You would need to check the part number of the AP on Cisco website to verify if it is allowed to operate in the Asia or Asia pacific region or even in India. Countries or Continents have regulations on wireless lan which may restrict certain channels from been used in those countries. Manufacturers follow these guidelines when producing APs.
Also what WLC code is running on your WLC and static IP did you assign on to the AP?
Well, This is for every Wireless Engineer working in mainly in India and sub countries - We later noticed that the APs also had another Tag - which says "made in China " - and we tried changing the country code to the Asia pacific region. The one with KOREA (KE) matched and all the APs came UP. So again the Country code was the issue.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...