Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

URL fail when access by Lobby-Admin

Dear all

We have bought a new WLC2504, with default OS is 7.6. But after I created lobby-admin, I cannot access to page to generate guest-access.

I came back to check old WLC with old OS is 7.4, and the access is successful

When I do compare the url, with 7.4 the url is https://x.x.x.x/screens/lobbyadmin_frameset.html, but with OS 7.6 (I also tried to upgrade to OS 8.0) the url is https://10.70.0.200/screens/frameset_dashboard.html

Could you please advice us is this issue is a bug or wrong configuration and how we can still use WLC 7.6 or 8.0 with lobby-admin feature

Regards

Hai

1 ACCEPTED SOLUTION

Accepted Solutions
Gold

Lobby admin broken on 8.0.100

Lobby admin broken on 8.0.100.0 on WLC 2500
CSCuq61753

Symptom:
Lobby admin login url broken on 8.0.100.0 on WlC 2500

Conditions:
WLC 2504 on 8.0.100.0, create a management user with "lobby admin" privileges. Login to WLC using http or https (Ex: https://10.1.2.3). Prompts for authentication and authentication succeeds after credential input but we get "The connection was reset" page irrespective of browser.

Workaround:
Issue happens only on 2504 and not on 5508.

Issue happens only using URL in this format https://10.1.2.3 or http://10.1.2.3

Use full URL,

for example https://10.1.2.3/screens/frameset.html , same lobby admin credentials will work fine.

Known Affected Releases:
(2)
8.0(100.0)
7.6(130.0)
3 REPLIES
Gold

Lobby admin broken on 8.0.100

Lobby admin broken on 8.0.100.0 on WLC 2500
CSCuq61753

Symptom:
Lobby admin login url broken on 8.0.100.0 on WlC 2500

Conditions:
WLC 2504 on 8.0.100.0, create a management user with "lobby admin" privileges. Login to WLC using http or https (Ex: https://10.1.2.3). Prompts for authentication and authentication succeeds after credential input but we get "The connection was reset" page irrespective of browser.

Workaround:
Issue happens only on 2504 and not on 5508.

Issue happens only using URL in this format https://10.1.2.3 or http://10.1.2.3

Use full URL,

for example https://10.1.2.3/screens/frameset.html , same lobby admin credentials will work fine.

Known Affected Releases:
(2)
8.0(100.0)
7.6(130.0)
New Member

 Thanks, solved my issue!

 

Thanks, solved my issue!

Cisco 2504 with 7.6.130

 

New Member

Thanks

Thanks

2983
Views
15
Helpful
3
Replies