Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

user to user per ssid

Hi,

I'm having some difficulties configuring my Cisco WLC (5508) - ver 7.0.230.0 .

I'm have multiple client device residing on same vlan associated to the WLC but unable to telnet over port 8090. However, when inter-vlan, client device able to telnet over port 8090.

So in brief :

Say Machine A as application hosted machine and Machine B as client machine;

Machine A

Machine B

Telnet over port 8090 from B to A

In Vlan 6

In vlan 6

Not ok

in Vlan 6

In vlan 4

OK

inVlan 4

In vlan 6

OK

Any advice where i should be looking on the WLC to allow telnet port 8090 over from Machine A to B within the vlan .

Thanks.

Everyone's tags (3)
2 REPLIES
Hall of Fame Super Silver

Re: user to user per ssid

Make sure you don't have PTP blocking enabled on the WLAN SSID advanced tab.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

Re: user to user per ssid

nope, the ptp blocking is disabled by default and were not configuration were made. so its disable. user is still not able to telnet from device from vlan 6 to vlan 6 via port 8090. No ACL were applied. anywhere else i should look at?

290
Views
0
Helpful
2
Replies
CreatePlease login to create content