I have a 10 nodes wired LAN about 100meters away from my wireless LAN and I wish to access the Internet through the wireless. Can I connect the wired LAN through an AP or must I use a bridge or workgroup bridge?
You will not be able to use an access point to connect the wired LAN to the wireless LAN because an AP will only talk to another AP if it is repeater mode. This mode disables the Ethernet port on the AP. The best way for you to accomplish connecting the two LANs is to use wireless bridges. A workgroup bridge will only handle 8 nodes.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...