I am looking at building a outdoor mesh to provide free open wireless, the plan is to use two AIR-LAP1242AG mounted inside our building with external antenna's attached to the outside as RAP's, LAP1524SB's will be chained from the RAP's going in two different directions. I will use direction antenna's for the 5GHz backhaul and dipole for the 2.4GHz user network, but with the very last LAP1524SB in each chain will use a dipole for the downstream 5GHz backhaul with a couple of extra LAP1242AG's to provide extra coverage on buildings with the same AP inside and external antenna's.
We will be using a 5508 Controller which also controls our internal wireless of AP 3502i's.
Would this work? and is it a reasonable to use LAP1242's for the RAP's to save dollars? Any advice would be much appreciated.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...