Using the Aironet 350 Lan Adapter with Compaq Handheld PC
I am using an aironet 350 with Aironet Client Utilities v2.20.05 on a Compaq iPAQ pocket PC running Microsoft Pocket PC v 3.0.11171 (build 11178). When the card is removed for a period of time and then re-insterted I have to re-install the client utilities to get the unit to re-associate. Anyone have any ideas how to remedy this?
Re: Using the Aironet 350 Lan Adapter with Compaq Handheld PC
We are using the exact same version and build of iPaq as you are. We experienced the same problem. Our symptoms were that the Activity light on the radio card would blink in a regular rhythm (blink...........blink, blink...........blink) (repeatly). We would need to reinstall the ACU to bring the card back. But it's not the card since moving the card to another iPaq would prove it works fine and inserting other cards in the problem iPaq would produce the same non-association results. It appears to be the drivers in the ACU losing recognition to the card.
Are your cards using V4.25.23? Our problems as described above were more prevalent using that firmware version. After upgrading the card firmware to 4.25.30 we have had far fewer problems regarding this though it has happened once even with 4.25.30. Hope this helps!
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...