09-05-2013 07:54 AM - edited 07-04-2021 12:46 AM
Hello All,
I am using ISE for external web authentication. Once client enter the UN and PWD in the ISE guest portal, the client must redirect to 1.1.1.1 that is the local web page. But i get a blank page..? And also if i use local web page for the redirection also it is not working ..?
Any idea..
KVS
09-11-2013 09:16 AM
Symptoms or Issue
Conditions:
Possible Causes:
Please check the below link for URL Redirection Resolutions:
http://www.cisco.com/en/US/docs/security/ise/1.1/user_guide/ise_troubleshooting.pdf
10-16-2013 06:42 PM
Possible Causes The switch is missing the ip http server and/or ip http secure-server command.
Resolution Verify and (if necessary) adjust the configuration on the switch. Possible Causes The switch is missing the ip http server and/or ip http secure-server command.
Resolution Verify and (if necessary) adjust the configuration on the switch.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: