Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

vlan on accesspoint

Hi

I have L3 switch in wich all the vlan are created .To L3 accesspoint is connected and vlan for accesspoint is

created .

Now the requirement is I need to create Vlan on accesspoint so that some imp users shouls be able to acess internet as

well as all the vlan.

some users should acess only internet

I have cisco aironet accesspoint.

1 REPLY

Re: vlan on accesspoint

that is easy enough to do.

when you create your ssid call the VLAN in the config:

dot11 ssid Test

vlan 10

authentication open

authentication wpa version 2

wpa-psk ascii 0 12345678

then on the radio:

interface dot11radio0.10

encapsulation dot1q 10

bridge-group 10

interface G0.10

encapsulation dot1q 10

bridge-group 10

Interface dot11radio0

encapsulation vlan 10 mode ciphers aes-ccm

ssid Test

From there rinse/repeat for each SSID and VLAN that you need to get working.

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
131
Views
4
Helpful
1
Replies