Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VLAN on AP

Hi.

A catalyst 2950 has 3 vlans:

- Native VLAN 1 with no ports associated

- VLAN 4 for the users

- VLAN 5 for the network management (with VLAN 5 ip address 192.168.7.29/28)

I want replicate the same VLANS on the AP (1130AG): VLAN 4 for the users and VLAN 5 for AP management, but i would like to avoid to make native the vlan 5. It is possible to achieve this?

So far i configured the switch's FastEthernet as Trunk, carrying the VLAN 4 and 5, and on AP i've created interface FastEthernet0.4 and Dot11Radio0.4 for the VLAN 4.

interface FastEthernet0.4

encapsulation dot1Q 4

no ip route-cache

bridge-group 4

no bridge-group 4 source-learning

bridge-group 4 spanning-disabled

interface Dot11Radio0.4

encapsulation dot1Q 4

no ip route-cache

bridge-group 4

bridge-group 4 subscriber-loop-control

bridge-group 4 block-unknown-source

no bridge-group 4 source-learning

no bridge-group 4 unicast-flooding

bridge-group 4 spanning-disabled

For what concernes the VLAN 5, all i did is:

interface FastEthernet0.5

encapsulation dot1Q 5

no ip route-cache

interface BVI1

ip address 192.168.7.29 255.255.255.240

no ip route-cache

What else should i do, now?

1 REPLY
New Member

Re: VLAN on AP

on my 1310 wireless bridge I have to put following config for each vlan (here vlan7 as example):

dot11 vlan-name Printers vlan 7

!

interface Dot11Radio0.7

encapsulation dot1Q 7

no ip route-cache

bridge-group 7

bridge-group 7 spanning-disabled

!

interface FastEthernet0.7

encapsulation dot1Q 7

no ip route-cache

bridge-group 7

bridge-group 7 spanning-disabled

Of course interface on switch connected to wireless unit should be in trunk mode. Vlan 7 should exist on the switch as well.

147
Views
0
Helpful
1
Replies
CreatePlease login to create content