Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Vocera Badge to Badge roaming issues with Lwap

Has anyone experienced "one way audio or dropped calls" during a badge to badge call roaming on a Cisco lwap network running 4.0.179.8? Badge to Lan calls works perfectly throughout the facility. The new Vocera 1.08 configuration document recommendations has been followed. Vocera badges and servers reside on the same subnet. The RF network has been tested and meet all rssi and snr levels. We presently have open Tac cases with Vocera and Cisco. If anyone has any recommendations or would like to share their experiences or war stories, I would love to hear it.. Thanks.....

2 REPLIES
New Member

Re: Vocera Badge to Badge roaming issues with Lwap

Two useful commands to use in order to verify packet flow are the debug cch323 rtp command and the debug voip rtp command. The debug cch323 rtp command displays packets that are transmitted (X) and received (R) by the router. An uppercase character indicates successful transmission or reception. A lowercase character indicates a dropped packet.

New Member

Re: Vocera Badge to Badge roaming issues with Lwap

Thanks for the info....We also received some great debug cmd's from TAC to assist us in troubleshooting the problem.

464
Views
0
Helpful
2
Replies
CreatePlease login to create content