Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

WCS 5.1.151 create ACL Security Template

I created some ACS templates in WCS 5.1.151, when I view them in WLC 4.2.130 I see errors like Protocol = IP on IP or Protocol = 255 and the ACLs don't work.

7 REPLIES
Silver

Re: WCS 5.1.151 create ACL Security Template

Follow the instructions in these sections to apply ACLs using the controller GUI:

Applying an Access Control List to an Interface

Applying an Access Control List to the Controller CPU

Applying an Access Control List to a WLAN

Applying a Preauthentication Access Control List to a WLAN

Here is the URL for the configurationi ACL for the WLC it may help you

http://www.cisco.com/en/US/docs/wireless/controller/4.2/configuration/guide/c42sol.html#wp1104164

Re: WCS 5.1.151 create ACL Security Template

Creating ACLs in the Controller GUI has no problems, however we'd rather configure WCS templates and push them to Controllers to reduce labor and assure a consistent configuration across all WLCs.

Community Member

Re: WCS 5.1.151 create ACL Security Template

I am seeing this issue also.

Apply an ACL template to a controller from WCS. The protocol ANY is translated to "other 255". The ACL does not function for any protocol at this point. Manually update to protocol any on the controller and the ACL works properly.

I also noticed some inconsistencies on ACL sequencing but haven't narrowed those down.

Re: WCS 5.1.151 create ACL Security Template

I opened a TAC case but haven't gotten a answer. I would encourage you to do the same. I spent 2 days troubleshooting this!

Community Member

Re: WCS 5.1.151 create ACL Security Template

I did.

What version WCS are you running? I am using 5.1.64.0.

Re: WCS 5.1.151 create ACL Security Template

WCS = 5.1.64.0 and WLC-4404 = 4.2.130.0

Community Member

Re: WCS 5.1.151 create ACL Security Template

My controllers are WLC-4402 and they are running 5.1.151.0.

Here is some bugs that might be our problem.

CSCsr66296

CSCsr68838

549
Views
0
Helpful
7
Replies
CreatePlease to create content