Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

WCS Import existing WLAN on Controller

We have a couple of controllers that were configured and running now we have added WCS and added the existing controllers.

We created a template for a new WLAN and then noticed that existing WLAN's and interfaces were not imported into WCS.

Is there anyway to import the existing info into WCS?

1 REPLY

WCS Import existing WLAN on Controller

Discovering Templates from Controllers

When prompted, WCS can search for associated templates for a controller and show the results.


Step 1 Choose Configure > Controller.

Step 2 Choose a desired controller by clicking the check box in front of the IP Address column.

Step 3 From the Select a command drop-down menu, choose Discover Templates from Controller and click Go.

A warning message confirms that the template discovery refreshes the configuration from the controller first.

The results page shows the template name, number, and template type.

You can also just do a refresh config from the WLC, and overright what's not on the WCS.

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
285
Views
0
Helpful
1
Replies
CreatePlease to create content