Just recently installed our WCS(6.0) and I need to track how many users are connecting to each AP. Is there a report like that. I went to the templates but could not locate one I see one for client count, but I need one for client count per AP.
I use that and it gives my current cliet connects, I was looking for a may of treanding access point useage. I need to know if we are saturating some of our access points. We only have 90 AP and we are going, but I have user that complain they keep dropping a connection. Nothing in the log to tell me why so I was hoping to see if it is because we are exceeding the client limit.
If you are running 6.0.132 you can use the reporting feature.
In the WCS, click on Reports - Report Launch Pad. Under the 'Clients' table there is a report called 'Client Count', click on the 'New' link next to that.
Now you can create the report, under Report By, you can either see a report by controller, or narrow that down to specific APs, or APs in specific buildings. The edit button under the selection list lets you drill down further and get more specific.
You can then pick a time period to report on(default of 1 hour), and then click 'Run Report' to see the results.
If it is something that you are going to frequently review you could save the report and schedule it to run every x hours,days,etc and email you a PDF of the results, or save a PDF to a tftp server.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...